| Chamber size | 620mm wide × 1260mm deep × 990mm high |
|---|---|
| External dimensions | 1700mm wide (control box on left hand side) × 2000mm deep (both doors closed) × 2000mm high |
| External dimensions, doors open | depth 4000mm |
| Base trolley dimensions useable | 600mm wide × 1220mm deep |
| Approximate weight | 2 1/2 Tons |
| Maximum temperature | 1200°C |
| Power rating | Estimated at 44 kilowatts, 3 phase and neutral. This can be confirmed later. |
| Other features | Elements in sides, both doors and base (2 trolley bases both have elements in) Fitted with an IPCO 3300 programmer, 3 zone Heavily insulated kiln. Lightweight fibre and brick 3 zones of temperature control Base middle and top 3 type R thermocouples fitted Automatic roof vent |
| Price | POA |
| Power rating | 4.4 kWatts |
|---|---|
| Supply | 20 amp single phase supply needed |
| Chamber size | 310mm wide × 310mm deep × 310mm high |
| External dimensions | 800mm wide × 700mm deep × 1200mm high |
| Other features | Fitted with type R thermocouple, a new MITSCO 3000/1 programmer |
| Price | £700.00 + VAT |
| Maximum temperature | 1400°C |
|---|---|
| Internal chamber dimensions | 350mm wide × 490mm deep × 340mm high |
| External dimensions | 845mm wide × 800mm deep × 1540mm high |
| Power rating | 11 kwatts 3 phase & neutral |
| Other features | Fitted with a transformer Fitted with a type R thermocouple and a new MITSCO 3300/2 programmer Heated by Silicon Carbide Elements, vertically down each side. Fast heating, newly painted red. |
| Price | £2700.00 + VAT |
| Power rating | 9 kWatts |
|---|---|
| Supply | Single or 3 phase |
| Maximum temperature | 1300°C |
| Cubic capacity | 2.4 cu ft |
| Chamber size | 380mm wide × 400mm deep × 450mm high |
| External dimensions | 660mm wide × 900mm deep × 1550mm high |
| Other features | Fitted with soak/cut off controller and type R thermocouple |
| Price | £627.00 + VAT |
| Power rating | 5 kWatts |
|---|---|
| Supply | 230 Volts single phase |
| Maximum temperature | 1300°C |
| Cubic capacity | 1.9 cu ft |
| Chamber size | 375mm wide × 325mm deep × 457mm high |
| External dimensions | 790mm wide × 800mm deep × 1550mm high |
| Other features | Fitted with type R thermocouple and Cambridge 401 programmer. Elements in sides only. |
| Price | £750.00 + VAT |
| Power rating | 12 kWatts |
|---|---|
| Supply | 60 amp single phase |
| Maximum temperature | 1260°C |
| Chamber size | 530mm wide × 460mm deep × 710mm high |
| External dimensions | 940mm wide × 790mm deep × 1560mm high |
| Other features | Fitted with a new set of elements and a new IPCO3300/3 programmer. Fitted with a type R thermocouple. |
| Price | £1500.00 +VAT |
| Supply | Three phase |
|---|---|
| Price | £427.00 + VAT |
| Price | £390.00 + VAT |
|---|
| Price | POA |
|---|